PackBELL - nO sOUND
3 posts
• Page 1 of 1
PackBELL - nO sOUND
by Chris707 on Mon Jun 09, 2008 4:40 pm
Can anyone help please. Packard Bell desktop S/N032247020158.New H/Drive fitted and Windows xp loaded. All works well - no sound. Checked P/B site downloaded driver for SigmaTelC-Major(STAC97N) for SIS audio driver. Device manager shows nothing missing but still no sound. Where can I go from here?
- Chris707
- Beginner
- Posts: 2
- Joined: Mon Jun 09, 2008 4:27 pm
by davey6 on Mon Jun 09, 2008 10:48 pm
click start , control panel , sound and audio devices.
click the audio tab.
does windows list the SigmaTel as default playback device ?
if not use the pull down menu and select it.
click apply and ok restart the pc.
would be a good idea to check to make sure your speakers are not at fault as well , and that the volume is turned up and not muted on the pc.
click the audio tab.
does windows list the SigmaTel as default playback device ?
if not use the pull down menu and select it.
click apply and ok restart the pc.
would be a good idea to check to make sure your speakers are not at fault as well , and that the volume is turned up and not muted on the pc.
-
davey6 - Forum Mod
- Posts: 372
- Joined: Tue Jan 31, 2006 3:07 pm
- Location: catford london
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest